Dold Electric S.A.R.L.

ZA Centre CIRSUD
6C Route de BERGHEIM
F-67600 Sélestat

Contrôleurs d'arrêt et de vitesse de rotation

SAFEMASTER S - surveillance de l'arrêt et de la vitesse de rotation confortable et de sécurité

Conformément à la nouvelle directive Machines, l'état de fonctionnement d'un entraînement doit être surveillé et maintenu en toute sécurité pendant son arrêt. Les applications typiques sont la validation de verrouillages de porte de protection après la détection de l'arrêt du mouvement dangereux, ainsi que le fonctionnement avec des dispositifs de protection ouverts et une vitesse de rotation réduite pendant le mode réglage de la machine. Les nouveaux contrôleurs de vitesse de rotation de la gamme SAFEMASTER S détectent et signalent l'arrêt et la survitesse des machines et installations en mode automatique et en mode réglage. Sa surveillance de sécurité intégrée de la porte de protection garantit en outre une augmentation de la productivité et une grande sécurité du personnel opérateur.

SAFEMASTER S - surveillance de l'arrêt et de la vitesse de rotation confortable et de sécurité Conformément à la nouvelle directive Machines, l'état de fonctionnement d'un entraînement doit être... lire plus »
Fermer fenêtre
Contrôleurs d'arrêt et de vitesse de rotation

SAFEMASTER S - surveillance de l'arrêt et de la vitesse de rotation confortable et de sécurité

Conformément à la nouvelle directive Machines, l'état de fonctionnement d'un entraînement doit être surveillé et maintenu en toute sécurité pendant son arrêt. Les applications typiques sont la validation de verrouillages de porte de protection après la détection de l'arrêt du mouvement dangereux, ainsi que le fonctionnement avec des dispositifs de protection ouverts et une vitesse de rotation réduite pendant le mode réglage de la machine. Les nouveaux contrôleurs de vitesse de rotation de la gamme SAFEMASTER S détectent et signalent l'arrêt et la survitesse des machines et installations en mode automatique et en mode réglage. Sa surveillance de sécurité intégrée de la porte de protection garantit en outre une augmentation de la productivité et une grande sécurité du personnel opérateur.

Highlights

  • Jusqu‘à cat. 4 / PL e ou SIL 3
  • Réglage simple et rapide par commutateur rotatif ou écran, sans PC
  • Fonctions de diagnostic étendues
  • Convient pour les systèmes de rétroaction standard des moteurs et les détecteurs de proximité (selon le type)
  • Paramétrage confortable guidé par menu via l‘écran frontal (selon le type)
  • Sans capteur (selon le type) et facile à installer ultérieurement
  • Surveillance des sur-, sous-fréquences ou en fenêtre
  • Facile à intégrer dans des solutions d‘entraînement existantes

Product Finder

Fermer filtres
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
de à
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
Aucun résultat trouvé pour le filtre !

Safe standstill and speed monitoring with initiators (proximity switches)

Standstill and speed monitor - SAFEMASTER S

The standstill and speed monitors are used for safety-related detection or monitoring of a standstill and additionally for monitoring a set speed window (lower and upper speed limit) in setup or automatic mode. To detect standstill or the speed of the motor, the speed (frequency) is measured by means of two NPN or PNP proximity switches (special design variant with NAMUR sensors) or via encoders (sin/cos, TTL, HTL) with two signal tracks. A combination of encoder and one NPN or PNP proximity switch is also possible.

Safe sensorless standstill monitoring

Standstill monitor  - SAFEMASTER S

The safe sensorless standstill monitors of the SAFEMASTER S series detect the standstill of 3-phase and 1-phase motors independent of the direction of rotation. Otherwise required sensors, such as encoders or proximity switches, are not required. Access to the hazardous area of a system is only granted by the enable signal of the standstill monitor after the drive has been switched off and coasting. To detect a standstill, the remanence voltage induced by the motor windings is evaluated and thus offers safe standstill monitoring up to Cat. 4 / PL e or SIL 3, even if the motor has already been switched off.

Safe detection of standstill, e.g. for:

  • Safety circuits according to IEC / EN 60204 in plants with dangerous machine parts or tools, e.g. for the release of protective devices
  • Avoidance of machine damage when unexpected running in the process can lead to collisions
  • Motor controls with reversal of direction of rotation

Safe sensorless frequency monitoring

Frequency monitor  - SAFEMASTER S

The speed and frequency monitors monitor frequency-controlled drives without sensors and safely up to 690 V. Sensorless frequency monitoring eliminates the need to install additional proximity switches or initiators. The frequency monitor thus creates new possibilities for design, planning and retrofitting, even for larger machines and systems, e.g. in woodworking or machine tools.

The frequency monitors are used for safety-related detection or monitoring of overfrequency, underfrequency or for monitoring a set frequency window. In case of deviations or violation of the set window range, the frequency monitor switches off safely and shows its strengths compared to frequency inverters with integrated safety functions when simplicity, flexibility and safety are required in equal measure.

standstill monitor

Standstill and speed monitors Safety functions according to DIN EN 61800-5-2

According to the new Machinery Directive, the operating state of a drive must be safely monitored and maintained when it is stopped. Typical applications include the release of safety gate interlocks after the standstill of the hazardous movement has been detected, as well as working with open guards and reduced speed during machine setup operation. With its extensive product range of sensorless standstill monitors, Dold already offers a convenient solution for safe standstill monitoring (UG 6946).

With appropriate wiring, the safety functions STO (safe torque off), SOS (safe operating stop), SLS (safely-limited speed), SSM (safe speed monitoring) and SSR (safe speed range) can be implemented. SAFEMASTER S series standstill and speed monitors offer maximum safety up to Cat. 4 / PL e or SIL 3.

Safety functions according to DIN EN 61800-5-2

Safe Torque Off (STO)

Safe Torque Off (STO)

No energy is supplied to the motor that can cause rotation (or motion in the case of a linear motor). The PDS(SR) does not supply energy to the motor that can cause torque (or force in the case of a linear motor).

 Safe Operating Stop (SOS)

Safe Operating Stop (SOS)

The SOS function prevents the motor from deviating from the stop position by more than a specified amount. The PDS(SR) provides the motor with the energy that allows it to withstand being attacked by external forces.

 Safe Speed Range (SSR)

Safe Speed Range (SSR)

The SSR function keeps the motor speed within specified limits.

 Safely-Limited Speed (SLS)

Safely-Limited Speed (SLS)

The SLS function prevents the motor from exceeding the set speed limit.

 Safe Speed Monitor (SSM)

Safe Speed Monitor (SSM)

The SSM function provides a safe output signal to indicate if the motor speed is below a specified limit.

Safe Direction (SDI)

Safe Direction (SDI)

The SDI function prevents a motor from moving in an invalid direction.

Technical contribution - Standstill monitoring without sensors

Eliminating hazards by electric drives

Stillstandsüberwachung Fachbeitrag

Standstill monitor technical contribution (pdf)

Application areas speed monitor

The safe speed monitors offer a convenient and compact solution for safety-related speed monitoring, as used in wind turbines, centrifuges or stage technology. The speed monitors are also used, for example, in woodworking, conveyor technology or machine tools.

Safety gate monitoring by means of standstill monitors and solenoid interlock with command function

For maintenance work, the system is shut down in a controlled manner by actuating the stop function on the solenoid interlock (1). Access to the hazardous machine area is monitored by the UG 6946 (2). Only after a safe standstill has been detected does the standstill monitor release the solenoid interlock and the safety guard (3) can be unlocked. When the safety guard is opened, dangerous movements must be switched off immediately and secured against restarting. Only then can the service technician safely enter the system. The enabling switch is taken into the safety area of the machine for its own protection (4).

Drehzahlwächter

Safe drive monitoring combined with the SAFEMASTER STS safety switch and key transfer system

SAFEMASTER STS is the reliable safety switch and key transfer system used to safeguard separating protective devices of machines and systems. The SAFEMASTER STS product range includes electromechanical safety switches, solenoid interlocks (safety switches with guard locking), key transfer and safety command devices.

Product portfolio - Safe drive monitoring - SAFEMASTER S

  • Standstill monitor (standstill monitoring) - UG 6946
  • Standstill and speed monitor (standstill and speed monitoring) - UH 6932
  • Speed and frequency monitor (speed and frequency monitoring) - UH 6937